Auseal EC25 Jasper (Brown) Sealer 20L for Concrete Sleepers
EC25 is a general purpose concrete sealant designed specifically for sealing and protecting dry concrete sleepers with a medium gloss finish. EC25 is made entirely of acrylic copolymer.
$ 174.90 inc. GST
In stock
All orders will be shipped by NuPhy within 48 hours of order confirmation, tracking numbers are provided no later than a day after shipment on business days. You can check Shipping Policy for more information.
NuPhy offers a 1-year limited warranty for all NuPhy products. If there is any quality issue, please send relevant images or videos to service@nuphy.com for review.
NuPhy offers a 1-year limited warranty for all NuPhy products. If there is any quality issue, please send relevant images or videos to service@nuphy.com for review.
Features
- Excellent durability – good UV stability
- Excellent Water Resistance
- Reduces Efflorescence
- Suitability for both Interior and Exterior application.
- Low tyre marking characteristics
- Suitability for concrete, brick, terracotta and slate
- Coverage
5 – 7 square metres per litre, depending on surface profile and porosity. The first coat should be diluted up to 20% with solvent.
Surface Cleaning
Dust, dirt, oil, grease, and other contaminants must be removed from all surfaces to be sealed or coated.
Degrease all surfaces and rinse thoroughly with clean water, scrubbing to remove all contaminants while washing down the area. Repeat this procedure until all contaminant residues have been removed.
If the surface is not profiled, acid etch it with hydrochloric acid diluted 10 parts water to 1 part acid. Broom on the surface and leave to react for 10 minutes. Allow to dry before hosing off with copious amounts of fresh water.
Allow the surface to completely dry before applying the sealer.
Application
To ensure uniformity, thoroughly stir before and during application, making sure that any suspended pigment (if coloured) is completely re-incorporated.
To aid penetration and adhesion, the first coat should be thinned with 10-20% Xylene.
Using a broom, roller, or spray gun, apply the coating evenly. Blisters can form if the product is applied unevenly.
Allow the recommended drying time before applying a full second coat without dilution.
Related Products
